O Samba não consegue montar como daemon (NT_STATUS_BAD_NETWORK_NAME). Bem em primeiro plano

Question

O Samba não consegue montar como daemon (NT_STATUS_BAD_NETWORK_NAME). Bem em primeiro plano

#1 resposta do (0 votos)

1

A instância do Samba (4.7.5) não permite que os usuários naveguem em nenhum compartilhamento quando executados como um daemon systemctl, mas está funcionando bem quando executado como um serviço de primeiro plano.

Conteúdo da unidade de serviço systemctl:

# cat /usr/lib/systemd/system/smb.service 
[Unit]
Description=Samba SMB Daemon
After=syslog.target network.target nmb.service winbind.service

[Service]
Environment=KRB5CCNAME=FILE:/run/samba/krb5cc_samba
Type=notify
NotifyAccess=all
PIDFile=/run/smbd.pid
LimitNOFILE=16384
EnvironmentFile=-/etc/sysconfig/samba
ExecStart=/usr/sbin/smbd -F --no-process-group $SMBDOPTIONS
ExecReload=/usr/bin/kill -HUP $MAINPID
LimitCORE=infinity

[Install]
WantedBy=multi-user.target

Registra quando executado via systemctl:

[2018/02/26 16:57:37.676020,  3, pid=2994] ../lib/util/access.c:365(allow_access)
  Allowed connection from 192.168.247.72 (192.168.247.72)
[2018/02/26 16:57:37.676283,  3, pid=2994] ../source3/param/loadparm.c:3862(lp_load_ex)
  lp_load_ex: refreshing parameters
[2018/02/26 16:57:37.676497,  3, pid=2994] ../source3/param/loadparm.c:549(init_globals)
  Initialising global parameters
[2018/02/26 16:57:37.676661,  3, pid=2994] ../source3/param/loadparm.c:2776(lp_do_section)
  Processing section "[global]"
[2018/02/26 16:57:37.676960,  2, pid=2994] ../source3/param/loadparm.c:2793(lp_do_section)
  Processing section "[test]"
[2018/02/26 16:57:37.677137,  3, pid=2994] ../source3/param/loadparm.c:1611(lp_add_ipc)
  adding IPC service
[2018/02/26 16:57:37.677433,  2, pid=2994] ../source3/lib/interface.c:345(add_interface)
  added interface ens192 ip=192.168.247.71 bcast=192.168.247.255 netmask=255.255.255.0
[2018/02/26 16:57:37.677553,  3, pid=2994] ../source3/smbd/oplock.c:1340(init_oplocks)
  init_oplocks: initializing messages.
[2018/02/26 16:57:37.677770,  3, pid=2994] ../source3/smbd/process.c:1959(process_smb)
  Transaction 0 of length 216 (0 toread)
[2018/02/26 16:57:37.677874,  3, pid=2994] ../source3/smbd/process.c:1539(switch_message)
  switch message SMBnegprot (pid 2994) conn 0x0
[2018/02/26 16:57:37.678639,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [PC NETWORK PROGRAM 1.0]
[2018/02/26 16:57:37.678766,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [MICROSOFT NETWORKS 1.03]
[2018/02/26 16:57:37.678864,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [MICROSOFT NETWORKS 3.0]
[2018/02/26 16:57:37.678968,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [LANMAN1.0]
[2018/02/26 16:57:37.679071,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [LM1.2X002]
[2018/02/26 16:57:37.679183,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [DOS LANMAN2.1]
[2018/02/26 16:57:37.679280,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [LANMAN2.1]
[2018/02/26 16:57:37.679379,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [Samba]
[2018/02/26 16:57:37.679472,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [NT LANMAN 1.0]
[2018/02/26 16:57:37.679583,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [NT LM 0.12]
[2018/02/26 16:57:37.679693,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [SMB 2.002]
[2018/02/26 16:57:37.679809,  3, pid=2994] ../source3/smbd/negprot.c:612(reply_negprot)
  Requested protocol [SMB 2.???]
[2018/02/26 16:57:37.679986,  3, pid=2994] ../source3/smbd/smb2_negprot.c:290(smbd_smb2_request_process_negprot)
  Selected protocol SMB2_FF
[2018/02/26 16:57:37.680477,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'gssapi_spnego' registered
[2018/02/26 16:57:37.680579,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'gssapi_krb5' registered
[2018/02/26 16:57:37.680684,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'gssapi_krb5_sasl' registered
[2018/02/26 16:57:37.680797,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'spnego' registered
[2018/02/26 16:57:37.680882,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'schannel' registered
[2018/02/26 16:57:37.680984,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'naclrpc_as_system' registered
[2018/02/26 16:57:37.681089,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'sasl-EXTERNAL' registered
[2018/02/26 16:57:37.681191,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'ntlmssp' registered
[2018/02/26 16:57:37.681291,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'ntlmssp_resume_ccache' registered
[2018/02/26 16:57:37.681384,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'http_basic' registered
[2018/02/26 16:57:37.681489,  3, pid=2994] ../auth/gensec/gensec_start.c:977(gensec_register)
  GENSEC backend 'http_ntlm' registered
[2018/02/26 16:57:37.682280,  3, pid=2994] ../source3/smbd/negprot.c:753(reply_negprot)
  Selected protocol SMB 2.???
[2018/02/26 16:57:37.682741,  3, pid=2994] ../source3/smbd/smb2_negprot.c:290(smbd_smb2_request_process_negprot)
  Selected protocol SMB3_11
[2018/02/26 16:57:37.686193,  3, pid=2994] ../auth/ntlmssp/ntlmssp_util.c:69(debug_ntlmssp_flags)
  Got NTLMSSP neg_flags=0x62088215
[2018/02/26 16:57:37.686799,  3, pid=2994] ../auth/ntlmssp/ntlmssp_server.c:454(ntlmssp_server_preauth)
  Got user=[test] domain=[SAMBA] workstation=[THINKPAD-X270] len1=24 len2=330
[2018/02/26 16:57:37.686917,  3, pid=2994] ../source3/param/loadparm.c:3862(lp_load_ex)
  lp_load_ex: refreshing parameters
[2018/02/26 16:57:37.687046,  3, pid=2994] ../source3/param/loadparm.c:549(init_globals)
  Initialising global parameters
[2018/02/26 16:57:37.687198,  3, pid=2994] ../source3/param/loadparm.c:2776(lp_do_section)
  Processing section "[global]"
[2018/02/26 16:57:37.687465,  2, pid=2994] ../source3/param/loadparm.c:2793(lp_do_section)
  Processing section "[test]"
[2018/02/26 16:57:37.687611,  3, pid=2994] ../source3/param/loadparm.c:1611(lp_add_ipc)
  adding IPC service
[2018/02/26 16:57:37.687742,  3, pid=2994] ../source3/auth/auth.c:189(auth_check_ntlm_password)
  check_ntlm_password:  Checking password for unmapped user [SAMBA]\[test]@[THINKPAD-X270] with the new password interface
[2018/02/26 16:57:37.687838,  3, pid=2994] ../source3/auth/auth.c:192(auth_check_ntlm_password)
  check_ntlm_password:  mapped user is: [SAMBA]\[test]@[THINKPAD-X270]
[2018/02/26 16:57:37.687998,  2, pid=2994] ../source3/lib/smbldap.c:841(smbldap_open_connection)
  smbldap_open_connection: connection opened
[2018/02/26 16:57:37.696554,  3, pid=2994] ../source3/lib/smbldap.c:1063(smbldap_connect_system)
  ldap_connect_system: successful connection to the LDAP server
[2018/02/26 16:57:37.699013,  2, pid=2994] ipa_sam.c:3216(init_sam_from_ldap)
  init_sam_from_ldap: Entry found for user: test
[2018/02/26 16:57:37.700693,  3, pid=2994] ../source3/auth/auth.c:256(auth_check_ntlm_password)
  auth_check_ntlm_password: sam authentication for user [test] succeeded
[2018/02/26 16:57:37.700736,  3, pid=2994] ../auth/auth_log.c:760(log_authentication_event_human_readable)
  Auth: [SMB2,(null)] user [SAMBA]\[test] at [Mon, 26 Feb 2018 16:57:37.700721 GMT] with [NTLMv2] status [NT_STATUS_OK] workstation [THINKPAD-X270] remote host [ipv4:192.168.247.72:39014] became [domain.internal]\[test] [S-1-5-21-2460180081-1733199439-1879006710-1003]. local host [ipv4:192.168.247.71:445] 
[2018/02/26 16:57:37.700769,  3, pid=2994] ../auth/auth_log.c:591(log_no_json)
  log_no_json: JSON auth logs not available unless compiled with jansson
[2018/02/26 16:57:37.700780,  2, pid=2994] ../source3/auth/auth.c:314(auth_check_ntlm_password)
  check_ntlm_password:  authentication for user [test] -> [test] -> [test] succeeded
[2018/02/26 16:57:37.700798,  3, pid=2994] ../auth/ntlmssp/ntlmssp_sign.c:509(ntlmssp_sign_reset)
  NTLMSSP Sign/Seal - Initialising with flags:
[2018/02/26 16:57:37.700807,  3, pid=2994] ../auth/ntlmssp/ntlmssp_util.c:69(debug_ntlmssp_flags)
  Got NTLMSSP neg_flags=0x62088215
[2018/02/26 16:57:37.700829,  3, pid=2994] ../auth/ntlmssp/ntlmssp_sign.c:509(ntlmssp_sign_reset)
  NTLMSSP Sign/Seal - Initialising with flags:
[2018/02/26 16:57:37.700837,  3, pid=2994] ../auth/ntlmssp/ntlmssp_util.c:69(debug_ntlmssp_flags)
  Got NTLMSSP neg_flags=0x62088215
[2018/02/26 16:57:37.702460,  3, pid=2994] ../source3/smbd/password.c:130(register_homes_share)
  Using static (or previously created) service for user 'test'; path = '/media/nas/test_dir'
[2018/02/26 16:57:37.703937,  3, pid=2994] ../lib/util/access.c:365(allow_access)
  Allowed connection from 192.168.247.72 (192.168.247.72)
[2018/02/26 16:57:37.703995,  3, pid=2994] ../source3/smbd/service.c:595(make_connection_snum)
  Connect path is '/tmp' for service [IPC$]
[2018/02/26 16:57:37.704019,  3, pid=2994] ../source3/smbd/vfs.c:113(vfs_init_default)
  Initialising default vfs hooks
[2018/02/26 16:57:37.704039,  3, pid=2994] ../source3/smbd/vfs.c:139(vfs_init_custom)
  Initialising custom vfs hooks from [/[Default VFS]/]
[2018/02/26 16:57:37.704093,  3, pid=2994] ../source3/smbd/service.c:841(make_connection_snum)
  thinkpad-x270 (ipv4:192.168.247.72:39014) connect to service IPC$ initially as user test (uid=1368400003, gid=1368400003) (pid 2994)
[2018/02/26 16:57:37.704548,  3, pid=2994] ../source3/smbd/msdfs.c:1008(get_referred_path)
  get_referred_path: |test| in dfs path \samba.domain.internal\test is not a dfs root.
[2018/02/26 16:57:37.704565,  3, pid=2994] ../source3/smbd/smb2_server.c:3139(smbd_smb2_request_error_ex)
  smbd_smb2_request_error_ex: smbd_smb2_request_error_ex: idx[1] status[NT_STATUS_NOT_FOUND] || at ../source3/smbd/smb2_ioctl.c:309
[2018/02/26 16:57:37.704836,  3, pid=2994] ../source3/smbd/service.c:1120(close_cnum)
  thinkpad-x270 (ipv4:192.168.247.72:39014) closed connection to service IPC$
[2018/02/26 16:57:37.705095,  3, pid=2994] ../lib/util/access.c:365(allow_access)
  Allowed connection from 192.168.247.72 (192.168.247.72)
[2018/02/26 16:57:37.705117,  3, pid=2994] ../libcli/security/dom_sid.c:210(dom_sid_parse_endp)
  string_to_sid: SID @ipausers is not in a valid format
[2018/02/26 16:57:37.705526,  3, pid=2994] ../source3/smbd/service.c:595(make_connection_snum)
  Connect path is '/media/nas/test_dir' for service [test]
[2018/02/26 16:57:37.705633,  3, pid=2994] ../libcli/security/dom_sid.c:210(dom_sid_parse_endp)
  string_to_sid: SID @ipausers is not in a valid format
[2018/02/26 16:57:37.705869,  3, pid=2994] ../source3/smbd/vfs.c:113(vfs_init_default)
  Initialising default vfs hooks
[2018/02/26 16:57:37.705962,  3, pid=2994] ../source3/smbd/vfs.c:139(vfs_init_custom)
  Initialising custom vfs hooks from [/[Default VFS]/]
[2018/02/26 16:57:37.706100,  3, pid=2994] ../libcli/security/dom_sid.c:210(dom_sid_parse_endp)
  string_to_sid: SID @ipausers is not in a valid format
[2018/02/26 16:57:37.706386,  0, pid=2994] ../source3/smbd/service.c:774(make_connection_snum)
  canonicalize_connect_path failed for service test, path /media/nas/test_dir
[2018/02/26 16:57:37.706955,  3, pid=2994] ../source3/smbd/smb2_server.c:3139(smbd_smb2_request_error_ex)
  smbd_smb2_request_error_ex: smbd_smb2_request_error_ex: idx[1] status[NT_STATUS_BAD_NETWORK_NAME] || at ../source3/smbd/smb2_tcon.c:135
[2018/02/26 16:57:37.707412,  3, pid=2994] ../source3/smbd/smb2_server.c:3139(smbd_smb2_request_error_ex)
  smbd_smb2_request_error_ex: smbd_smb2_request_error_ex: idx[1] status[NT_STATUS_NETWORK_NAME_DELETED] || at ../source3/smbd/smb2_server.c:2491
[2018/02/26 16:57:37.707871,  3, pid=2994] ../source3/smbd/server_exit.c:244(exit_server_common)
  Server exit (NT_STATUS_END_OF_FILE)
[2018/02/26 16:57:37.712408,  3, pid=2948] ../source3/lib/util_procid.c:54(pid_to_procid)
  pid_to_procid: messaging_dgm_get_unique failed: No such file or directory

Comando para executar em primeiro plano:

smbd -F

Estou um pouco perdido com este porque ambos estão usando os mesmos arquivos de configuração. O / etc / sysconfig / samba também está cheio de variáveis vazias.

Algumas coisas a serem observadas:

O Samba está conectado a um servidor de diretório LDAP
O Samba está sendo executado no Fedora 27
O comando systemctl e foreground está usando as mesmas permissões de diretório e mesmo usuário do sistema

Alguém pode me dar alguma pista sobre aonde ir a partir daqui? Eu não gosto de executar o comando em primeiro plano na tela como uma solução alternativa!

samba fedora linux

por MrNorm 26.02.2018 / 17:06

1 resposta

Tags samba fedora linux

Solte o pacote para domU em ponte no XenServer Por que o 'postmap' gera um banco de dados tão grande?

score 0 · Answer 1

Tive o mesmo problema e comecei a trabalhar. Check-out link

Eu precisava do "sudo chcon -R -t samba_share_t / path_to_your_share" nos meus compartilhamentos, mais "user = userusuário válido" no smb.conf, então funcionou.

"sudo setsebool -P samba_enable_home_dirs on" não funcionou para mim, mas também usou chcon ... e então funcionou.