Como corrigir “desautenticação por escolha local”?

10

Eu construí um Linux embutido usando o Buildroot e tenho alguns problemas para permanecer conectado ao meu AP. Não é possível obter um endereço IP mais de uma vez.

Eu uso o wpa_supplicant para me conectar ao meu AP usando o WPA2-PSK. Funciona com outros AP, como o meu smartphone no modo AP.

Quando uso iwconfig wlan0 , vejo que estou associado ao meu AP

wlan0     IEEE 802.11bgn  ESSID:"ZyXEL_B3B5"  
          Mode:Managed  Frequency:2.462 GHz  Access Point: 90:EF:68:D3:B3:B5   
          Bit Rate=58.5 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=53/70  Signal level=-57 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:1   Missed beacon:0

Mas não consigo obter um endereço IP com ifup wlan0

udhcpc (v1.22.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing

Devo dizer que só consigo obter um endereço IP uma vez. Se eu reiniciar, isso não será mais possível.

Consegui instalar dhclient em vez de usar o cliente DHCP padrão do Busybox, mas nada acontece (permaneço bloqueado indefinidamente)

dhclient wlan0

De acordo com as mensagens do meu kernel, parece que não estou continuamente associado

[  355.459738] wlan0: authenticate with 90:ef:68:d3:b3:b5 (try 1)
[  355.461366] wlan0: authenticated
[  355.461416] wlan0: associate with 90:ef:68:d3:b3:b5 (try 1)
[  355.469353] wlan0: RX AssocResp from 90:ef:68:d3:b3:b5 (capab=0x431 status=0 aid=1)
[  355.469364] wlan0: associated
[  365.547863] wlan0: deauthenticating from 90:ef:68:d3:b3:b5 by local choice (reason=3)
[  365.672765] cfg80211: Calling CRDA to update world regulatory domain
[  367.169736] wlan0: authenticate with 90:ef:68:d3:b3:b5 (try 1)
[  367.171421] wlan0: authenticated
[  367.194859] wlan0: associate with 90:ef:68:d3:b3:b5 (try 1)
[  367.198561] wlan0: RX AssocResp from 90:ef:68:d3:b3:b5 (capab=0x431 status=0 aid=1)
[  367.198584] wlan0: associated
[  377.277864] wlan0: deauthenticating from 90:ef:68:d3:b3:b5 by local choice (reason=3)
[  377.412822] cfg80211: Calling CRDA to update world regulatory domain
[  378.899738] wlan0: authenticate with 90:ef:68:d3:b3:b5 (try 1)
[  378.901668] wlan0: authenticated
[  378.924732] wlan0: associate with 90:ef:68:d3:b3:b5 (try 1)
[  378.928437] wlan0: RX AssocResp from 90:ef:68:d3:b3:b5 (capab=0x431 status=0 aid=1)
[  378.928461] wlan0: associated
[  389.008120] wlan0: deauthenticating from 90:ef:68:d3:b3:b5 by local choice (reason=3)
[  389.182888] cfg80211: Calling CRDA to update world regulatory domain
[  390.689735] wlan0: authenticate with 90:ef:68:d3:b3:b5 (try 1)
[  390.691415] wlan0: authenticated
[  390.714734] wlan0: associate with 90:ef:68:d3:b3:b5 (try 1)
[  390.720847] wlan0: RX AssocResp from 90:ef:68:d3:b3:b5 (capab=0x431 status=0 aid=1)
[  390.720870] wlan0: associated
[  400.811246] wlan0: deauthenticating from 90:ef:68:d3:b3:b5 by local choice (reason=3)
...

Os logs do meu AP

338     Nov 16 15:50:53 udhcpd[2404]: Received DISCOVER
339     Nov 16 15:50:53 udhcpd[2404]: unicasting packet to client yiaddr
340     Nov 16 15:50:56 udhcpd[2404]: Received DISCOVER
341     Nov 16 15:50:56 udhcpd[2404]: unicasting packet to client yiaddr
342     Nov 16 15:50:59 udhcpd[2404]: Received DISCOVER
343     Nov 16 15:50:59 udhcpd[2404]: unicasting packet to client yiaddr

Os logs quando funciona (apenas uma vez)

325     Nov 16 15:48:37 udhcpd[2404]: Received DISCOVER
326     Nov 16 15:48:37 udhcpd[2404]: unicasting packet to client yiaddr
327     Nov 16 15:48:37 udhcpd[2404]: Received REQUEST
328     Nov 16 15:48:37 udhcpd[2404]: lease = 11854360
329     Nov 16 15:48:37 udhcpd[2404]: requested = b2a8eb7f
330     Nov 16 15:48:37 udhcpd[2404]: server_id = c0a80101
331     Nov 16 15:48:37 udhcpd[2404]: unicasting packet to client yiaddr

Como resolver isso?

    
por didil 16.11.2015 / 11:22

1 resposta

6

Mudei a opção "Canal automático" para um canal fixo e a opção "Largura do canal" para 20 MHz no meu ponto de acesso e isso resolveu o meu problema.

    
por 16.11.2015 / 17:23