Estou executando o sistema operacional Linux Weakerth4n no meu antigo laptop Dell d600 que comprei na Defcon por US $ 80. Eu tenho uma pergunta sobre como fazer certos programas (como o Virtual Box); isso pode ser tão simples quanto dizer que minha distro específica não é suportada, mas vale a pena tentar. Pode ser que minha configuração do Kbuild esteja de alguma forma confusa, porque quando eu estava tentando instalar o ndiswrapper, eu primeiro obtive um erro do Kbuild do make e então isto:
(/usr/src/ndiswrapper-1.59# make)
make -C utils
make[1]: Entering directory '/usr/src/ndiswrapper-1.59/utils'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/usr/src/ndiswrapper-1.59/utils'
make -C driver
make[1]: Entering directory '/usr/src/ndiswrapper-1.59/driver'
make -C /usr/src/linux-headers-3.7.10blue-ghost1.9 M=/usr/src/ndiswrapper-1.59/driver
make[2]: Entering directory '/usr/src/linux-headers-3.7.10blue-ghost1.9'
/usr/src/linux-headers-3.7.10blue-ghost1.9/arch/x86/Makefile_32.cpu:2: *** missing separator. Stop.
make[2]: Leaving directory '/usr/src/linux-headers-3.7.10blue-ghost1.9'
make[1]: *** [modules] Error 2
make[1]: Leaving directory '/usr/src/ndiswrapper-1.59/driver'
make: *** [driver] Error 2
Então eu baixei as dependências para o VirtualBox como mostrado neste guia link mas ao invés de obter a fonte I acabou de baixar o arquivo .deb e executou um dpkg -i ./.deb e instalou o VirtualBox dessa maneira. Então eu ...
:VirtualBox
:WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.7.10blue-ghost1.9) or it failed to
load. Please recompile the kernel module and install it by
sudo /etc/init.d/vboxdrv setup
You will not be able to start VMs until this problem is fixed.
< erro > : Então eu executo o /etc/init.d/vboxdrv setup e obtenho este
:Stopping VirtualBox kernel modules ...done.
Uninstalling old VirtualBox DKMS kernel modules ...done.
Trying to register the VirtualBox kernel modules using DKMS
Error! Bad return status for module build on kernel: 3.7.10blue-ghost1.9 (i686)
Consult the make.log in the build directory
/var/lib/dkms/vboxhost/4.3.8/build/ for more information.
...failed!
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules ...failed!
(Look at /var/log/vbox-install.log to find out what went wrong)
< erro > : Eu acho que é porque o meu arco é suposto ser i386 não i686, então
:vim /var/lib/dkms/vboxhost/4.3.8/build/make.log
1 DKMS make.log for vboxhost-4.3.8 for kernel 3.7.10blue-ghost1.9 (i686)
2 Thu Mar 6 13:10:22 PST 2014
3 make: Entering directory '/usr/src/linux-headers-3.7.10blue-ghost1.9'
4 /usr/src/linux-headers-3.7.10blue-ghost1.9/arch/x86/Makefile_32.cpu:2: *** missing separator. Stop.
5 make: Leaving directory '/usr/src/linux-headers-3.7.10blue-ghost1.9'
:vim /var/log/vbox-install.log
1 Uninstalling modules from DKMS
2 removing old DKMS module vboxhost version 4.3.8
3
4 ------------------------------
5 Deleting module version: 4.3.8
6 completely from the DKMS tree.
7 ------------------------------
8 Done.
9 Attempting to install using DKMS
10
11 Creating symlink /var/lib/dkms/vboxhost/4.3.8/source ->
12 /usr/src/vboxhost-4.3.8
13
14 DKMS: add Completed.
15
16 Kernel preparation unnecessary for this kernel. Skipping...
17
18 Building module:
19 cleaning build area....
20 make KERNELRELEASE=3.7.10blue-ghost1.9 -C /lib/modules/3.7.10blue-ghost1.9/build M=/var/lib/dkms/vboxhost/4.3.8/build....
21 0
22 0
23 Failed to install using DKMS, attempting to install without
24 make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 CONFIG_MODULE_SIG= -C /lib/modules/3.7.10blue-ghost1.9/buil
25 /usr/src/linux-headers-3.7.10blue-ghost1.9/arch/x86/Makefile_32.cpu:2: *** missing separator. Stop.
26 make: *** [vboxdrv] Error 2
:uname -r
Linux ghostx 3.7.10blue-ghost1.9 #4 SMP Mon Mar 18 20:52:56 EDT 2013 i686 GNU/Linux
:whereis virtualbox dkms
virtualbox: /usr/bin/virtualbox /usr/lib/virtualbox /usr/share/virtualbox
dkms: /usr/src/nvidia-310.40/dkms.conf /usr/src/ndiswrapper-1.56/dkms.conf /usr/src/vboxhost-4.3.8/dkms.conf /usr/sbin/dkms /etc/dkms /usr/lib/dkms /usr/share/man/man8/dkms.8.gz
:dpkg --version
Debian 'dpkg' package management program version 1.15.8.13 (i386).
This is free software; see the GNU General Public License version 2 or
later for copying conditions. There is NO warranty.
:make --version
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i486-pc-linux-gnu
:vim /usr/src/linux-headers-3.7.10blue-ghost1.9/arch/x86/Makefile_32.cpu
# Put here option for CPU selection and depending optimization
choice
prompt "Processor family"
default M686 if X86_32
default GENERIC_CPU if X86_64
config M386
bool "386"
depends on X86_32 && !UML
---help---
This is the processor type of your CPU. This information is used for
optimizing purposes. In order to compile a kernel that can run on
all x86 CPU types (albeit not optimally fast), you can specify
"386" here.
The kernel will not necessarily run on earlier architectures than
the one you have chosen, e.g. a Pentium optimized kernel will run on
a PPro, but not necessarily on a i486.
Here are the settings recommended for greatest speed:
- "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
486DLC/DLC2, and UMC 486SX-S. Only "386" kernels will run on a 386
class machine.
- "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
- "586" for generic Pentium CPUs lacking the TSC
(time stamp counter) register.
- "Pentium-Classic" for the Intel Pentium.
- "Pentium-MMX" for the Intel Pentium MMX.
- "Pentium-Pro" for the Intel Pentium Pro.
- "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
- "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
- "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
- "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
- "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
- "Crusoe" for the Transmeta Crusoe series.
- "Efficeon" for the Transmeta Efficeon series.
- "Winchip-C6" for original IDT Winchip.
- "Winchip-2" for IDT Winchips with 3dNow! capabilities.
- "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
- "Geode GX/LX" For AMD Geode GX and LX processors.
- "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
- "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above).
- "VIA C7" for VIA C7.
If you dont know what to do, choose "386".
config M486
bool "486"
depends on X86_32
---help---
Select this for a 486 series processor, either Intel or one of the
compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
U5S.
config M586
bool "586/K5/5x86/6x86/6x86MX"
depends on X86_32
---help---
Select this for an 586 or 686 series processor such as the AMD K5,
the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
assume the RDTSC (Read Time Stamp Counter) instruction.
config M586TSC
bool "Pentium-Classic"
depends on X86_32
---help---
Select this for a Pentium Classic processor with the RDTSC (Read
Time Stamp Counter) instruction for benchmarking.
config M586MMX
bool "Pentium-MMX"
depends on X86_32
---help---
Select this for a Pentium with the MMX graphics/multimedia
extended instructions.
config M686
bool "Pentium-Pro"
depends on X86_32
---help---
Select this for Intel Pentium Pro chips. This enables the use of
Pentium Pro extended instructions, and disables the init-time guard
against the f00f bug found in earlier Pentiums.
config MPENTIUMII
bool "Pentium-II/Celeron(pre-Coppermine)"
depends on X86_32
---help---
Select this for Intel chips based on the Pentium-II and
pre-Coppermine Celeron core. This option enables an unaligned
copy optimization, compiles the kernel with optimization flags
tailored for the chip, and applies any applicable Pentium Pro
optimizations.
config MPENTIUMIII
bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
depends on X86_32
---help---
Select this for Intel chips based on the Pentium-III and
Celeron-Coppermine core. This option enables use of some
extended prefetch instructions in addition to the Pentium II
extensions.
config MPENTIUMM
bool "Pentium M"
depends on X86_32
---help---
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.
config MPENTIUM4
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
depends on X86_32
---help---
Select this for Intel Pentium 4 chips. This includes the
Pentium 4, Pentium D, P4-based Celeron and Xeon, and
Pentium-4 M (not Pentium M) chips. This option enables compile
flags optimized for the chip, uses the correct cache line size, and
applies any applicable optimizations.
CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 )
Select this for:
Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename:
-Willamette
-Northwood
-Mobile Pentium 4
-Mobile Pentium 4 M
-Extreme Edition (Gallatin)
-Prescott
-Prescott 2M
-Cedar Mill
-Presler
-Smithfiled
Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename:
-Foster
-Prestonia
-Gallatin
-Nocona
-Irwindale
-Cranford
-Potomac
-Paxville
-Dempsey
config MK6
bool "K6/K6-II/K6-III"
depends on X86_32
---help---
Select this for an AMD K6-family processor. Enables use of
some extended instructions, and passes appropriate optimization
flags to GCC.
config MK7
bool "Athlon/Duron/K7"
depends on X86_32
---help---
Select this for an AMD Athlon K7-family processor. Enables use of
some extended instructions, and passes appropriate optimization
flags to GCC.
config MK8
bool "Opteron/Athlon64/Hammer/K8"
---help---
Select this for an AMD Opteron or Athlon64 Hammer-family processor.
Enables use of some extended instructions, and passes appropriate
optimization flags to GCC.
config MCRUSOE
bool "Crusoe"
depends on X86_32
---help---
Select this for a Transmeta Crusoe processor. Treats the processor
like a 586 with TSC, and sets some GCC optimization flags (like a
Pentium Pro with no alignment requirements).
config MEFFICEON
bool "Efficeon"
depends on X86_32
---help---
Select this for a Transmeta Efficeon processor.
config MWINCHIPC6
bool "Winchip-C6"
depends on X86_32
---help---
Select this for an IDT Winchip C6 chip. Linux and GCC
treat this chip as a 586TSC with some extended instructions
and alignment requirements.
config MWINCHIP3D
bool "Winchip-2/Winchip-2A/Winchip-3"
depends on X86_32
---help---
Select this for an IDT Winchip-2, 2A or 3. Linux and GCC
treat this chip as a 586TSC with some extended instructions
and alignment requirements. Also enable out of order memory
stores for this CPU, which can increase performance of some
operations.
config MELAN
bool "AMD Elan"
depends on X86_32
---help---
Select this for an AMD Elan processor.
Do not use this option for K6/Athlon/Opteron processors!
config MGEODEGX1
bool "GeodeGX1"
depends on X86_32
---help---
Select this for a Geode GX1 (Cyrix MediaGX) chip.
config MGEODE_LX
bool "Geode GX/LX"
depends on X86_32
---help---
Select this for AMD Geode GX and LX processors.
config MCYRIXIII
bool "CyrixIII/VIA-C3"
depends on X86_32
---help---
Select this for a Cyrix III or C3 chip. Presently Linux and GCC
treat this chip as a generic 586. Whilst the CPU is 686 class,
it lacks the cmov extension which gcc assumes is present when
generating 686 code.
Note that Nehemiah (Model 9) and above will not boot with this
kernel due to them lacking the 3DNow! instructions used in earlier
incarnations of the CPU.
config MVIAC3_2
bool "VIA C3-2 (Nehemiah)"
depends on X86_32
---help---
Select this for a VIA C3 "Nehemiah". Selecting this enables usage
of SSE and tells gcc to treat the CPU as a 686.
Note, this kernel will not boot on older (pre model 9) C3s.
config MVIAC7
bool "VIA C7"
depends on X86_32
---help---
Select this for a VIA C7. Selecting this uses the correct cache
shift and tells gcc to treat the CPU as a 686.
config MPSC
bool "Intel P4 / older Netburst based Xeon"
depends on X86_64
---help---
Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
Xeon CPUs with Intel 64bit which is compatible with x86-64.
Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
Netburst core and shouldnt use this option. You can distinguish them
using the cpu family field
in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
config MCORE2
bool "Core 2/newer Xeon"
---help---
Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
53xx) CPUs. You can distinguish newer from older Xeons by the CPU
family in /proc/cpuinfo. Newer ones have 6 and older ones 15
(not a typo)
config MATOM
bool "Intel Atom"
---help---
Select this for the Intel Atom platform. Intel Atom CPUs have an
in-order pipelining architecture and thus can benefit from
accordingly optimized code. Use a recent GCC with specific Atom
support in order to fully benefit from selecting this option.
config GENERIC_CPU
bool "Generic-x86-64"
depends on X86_64
---help---
Generic x86-64 CPU.
Run equally well on all x86-64 CPUs.
endchoice
config X86_GENERIC
bool "Generic x86 support"
depends on X86_32
---help---
Instead of just including optimizations for the selected
x86 variant (e.g. PII, Crusoe or Athlon), include some more
generic optimizations as well. This will make the kernel
perform better on x86 CPUs other than that selected.
This is really intended for distributors who need more
generic optimizations.
#
# Define implied options from the CPU selection here
config X86_INTERNODE_CACHE_SHIFT
int
default "12" if X86_VSMP
default X86_L1_CACHE_SHIFT
config X86_CMPXCHG
def_bool y
depends on X86_64 || (X86_32 && !M386)
config X86_L1_CACHE_SHIFT
int
default "7" if MPENTIUM4 || MPSC
default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
default "4" if MELAN || M486 || M386 || MGEODEGX1
default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
config X86_XADD
def_bool y
depends on !M386
config X86_PPRO_FENCE
bool "PentiumPro memory ordering errata workaround"
depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
---help---
Old PentiumPro multiprocessor systems had errata that could cause
memory operations to violate the x86 ordering standard in rare cases.
Enabling this option will attempt to work around some (but not all)
occurrences of this problem, at the cost of much heavier spinlock and
memory barrier operations.
If unsure, say n here. Even distro kernels should think twice before
enabling this: there are few systems, and an unlikely bug.
config X86_F00F_BUG
def_bool y
depends on M586MMX || M586TSC || M586 || M486 || M386
config X86_INVD_BUG
def_bool y
depends on M486 || M386
config X86_WP_WORKS_OK
def_bool y
depends on !M386
config X86_INVLPG
def_bool y
depends on X86_32 && !M386
config X86_BSWAP
def_bool y
depends on X86_32 && !M386
config X86_POPAD_OK
def_bool y
depends on X86_32 && !M386
config X86_ALIGNMENT_16
def_bool y
depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
config X86_INTEL_USERCOPY
def_bool y
depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
config X86_USE_PPRO_CHECKSUM
def_bool y
depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MVIAC7 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM
config X86_USE_3DNOW
def_bool y
depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML
config X86_OOSTORE
def_bool y
depends on (MWINCHIP3D || MWINCHIPC6) && MTRR
#
# P6_NOPs are a relatively minor optimization that require a family >=
# 6 processor, except that it is broken on certain VIA chips.
# Furthermore, AMD chips prefer a totally different sequence of NOPs
# (which work on all CPUs). In addition, it looks like Virtual PC
# does not understand them.
#
# As a result, disallow these if we're not compiling for X86_64 (these
# NOPs do work on all x86-64 capable chips); the list of processors in
# the right-hand clause are the cores that benefit from this optimization.
#
config X86_P6_NOP
def_bool y
depends on X86_64
depends on (MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64
config X86_CMPXCHG64
def_bool y
depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM
# this should be set for all -march=.. options where the compiler
# generates cmov.
config X86_CMOV
def_bool y
depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
config X86_MINIMUM_CPU_FAMILY
int
default "64" if X86_64
default "6" if X86_32 && X86_P6_NOP
default "5" if X86_32 && X86_CMPXCHG64
default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
default "3"
config X86_DEBUGCTLMSR
def_bool y
depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386) && !UML
menuconfig PROCESSOR_SELECT
bool "Supported processor vendors" if EXPERT
---help---
This lets you choose what x86 vendor support code your kernel
will include.
config CPU_SUP_INTEL
default y
bool "Support Intel processors" if PROCESSOR_SELECT
---help---
This enables detection, tunings and quirks for Intel processors
You need this enabled if you want your kernel to run on an
Intel CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on an Intel
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_CYRIX_32
default y
bool "Support Cyrix processors" if PROCESSOR_SELECT
depends on M386 || M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT)
---help---
This enables detection, tunings and quirks for Cyrix processors
You need this enabled if you want your kernel to run on a
Cyrix CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a Cyrix
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_AMD
default y
bool "Support AMD processors" if PROCESSOR_SELECT
---help---
This enables detection, tunings and quirks for AMD processors
You need this enabled if you want your kernel to run on an
AMD CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on an AMD
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_CENTAUR
default y
bool "Support Centaur processors" if PROCESSOR_SELECT
---help---
This enables detection, tunings and quirks for Centaur processors
You need this enabled if you want your kernel to run on a
Centaur CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a Centaur
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_TRANSMETA_32
default y
bool "Support Transmeta processors" if PROCESSOR_SELECT
depends on !64BIT
---help---
This enables detection, tunings and quirks for Transmeta processors
You need this enabled if you want your kernel to run on a
Transmeta CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a Transmeta
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_UMC_32
default y
bool "Support UMC processors" if PROCESSOR_SELECT
depends on M386 || M486 || (EXPERT && !64BIT)
---help---
This enables detection, tunings and quirks for UMC processors
You need this enabled if you want your kernel to run on a
UMC CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a UMC
CPU might render the kernel unbootable.
If unsure, say N.
apt sources.list
1 deb http://ftp.us.debian.org/debian squeeze main
2 deb-src http://ftp.us.debian.org/debian squeeze main
3
4 deb http://ftp.us.debian.org/debian squeeze-updates main
5 deb-src http://ftp.us.debian.org/debian squeeze-updates main
6
7 deb http://security.debian.org/ squeeze/updates main
8 deb-src http://security.debian.org/ squeeze/updates main
9
10 deb http://repository.spotify.com stable non-free
11
12 #deb http://ftp.us.debian.org/debian squeeze main
13 #deb-src http://ftp.us.debian.org/debian squeeze main
14
15 #deb http://ftp.us.debian.org/debian squeeze-updates main
16 #deb-src http://ftp.us.debian.org/debian squeeze-updates main
17
18 # remastersys:
19 # deb http://www.geekconnection.org/remastersys/repository squeeze/
20
21 # Squeezy Bullshit:
22 # deb http://ftp.de.debian.org/debian squeeze main non-free
23
24 #deb http://www.debian-multimedia.org squeeze main non-free
25 #deb-src http://www.debian-multimedia.org squeeze main non-free
Resultados:
:apt-get install linux-headers-($uname -r)
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-3.7.10blue-ghost1.9 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
:apt-cache search virtualbox
imvirt - detects several virtualizations
libimvirt-perl - Perl module for detecting several virtualizations
libvirt-bin - the programs for the libvirt library
libvirt-dev - development files for the libvirt library
libvirt-doc - documentation for the libvirt library
libvirt0-dbg - library for interfacing with different virtualization systems
libvirt0 - library for interfacing with different virtualization systems
python-libvirt - libvirt Python bindings
virtualbox-ose-dbg - x86 virtualization solution - debugging symbols
virtualbox-ose-dkms - x86 virtualization solution - kernel module sources for dkms
virtualbox-ose-fuse - x86 virtualization solution - virtual filesystem
virtualbox-ose-guest-dkms - x86 virtualization solution - guest addition module source for dkms
virtualbox-ose-guest-source - x86 virtualization solution - guest addition module source
virtualbox-ose-guest-utils - x86 virtualization solution - non-X11 guest utilities
virtualbox-ose-guest-x11 - x86 virtualization solution - X11 guest utilities
virtualbox-ose-qt - x86 virtualization solution - Qt based user interface
virtualbox-ose-source - x86 virtualization solution - kernel module source
virtualbox-ose - x86 virtualization solution - base binaries
xmount - tool to crossmount between multiple input and output harddisk images
virtualbox-4.3 - Oracle VM VirtualBox
:apt-get install virutalbox
Reading package lists... Done
Building dependency tree
Reading state information... Done
virtualbox-4.3 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.