Eu tentei adicionar um scanner USB ao meu sistema sem qualquer sorte e agora quando eu começo o XSane ou o Image Scan! para Linux eu recebo uma lista de scanners que não funcionam. Como estes podem ser removidos?
Eu tentei:
# pacman -Rsc iscan iscan-data sane xsane
# rm -rf ~/.sane
# rm -rf ~/.xsane
# rm -rf /etc/sane.d
e depois de reinstalar os pacotes, os dispositivos antigos ainda são encontrados. Eu já inicializei muitas vezes.
# sane-find-scanner (10-06 19:05)
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04b8 [EPSON], product=0x013d [Epson Perfection V39]) at libusb:004:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
O scanner é detectado.
# scanimage -L (10-06 19:07)
device 'epkowa:interpreter:004:003' is a Epson (unknown model) flatbed scanner
device 'epkowa:interpreter:004:003' is a Epson (unknown model) flatbed scanner
device 'epkowa:interpreter:004:003' is a Epson (unknown model) flatbed scanner
device 'epkowa:interpreter:004:003' is a Epson (unknown model) flatbed scanner
device 'epkowa:interpreter:004:003' is a Epson (unknown model) flatbed scanner
lsusb:
# lsusb | grep -i epson (10-06 19:10)
Bus 004 Device 003: ID 04b8:013d Seiko Epson Corp.
Comandos para adicionar scanner com firmware incorreto .bin
arquivos são perdidos.