Estou recebendo os seguintes erros:
xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600
61.0 640x480 60.0
Quando estou tentando aumentar minha resolução do sistema operacional convidado para 1290X1080
, enquanto tentei seguir as etapas mencionadas AQUI . Antes disso, fui capaz de alterar a resolução pelas etapas acima mencionadas, mas depois de uma atualização para CENTOS 6.5 to 6.6
, estou enfrentando esse erro. Muitas pessoas estão tendo o mesmo problema, mas nenhuma solução não consegui resolver meu problema .
Minha configuração atual do sistema:
GUEST OS : CENTOIS 6.6
HOST OS : WIndows 7 enterprise
Display Adapter : Intel HD
VirtualBox : 4.6.3
VBoxGuestaddition is also succesfully installed and up and running
O resultado do CENTOS, quando eu faço um lspci -vnn
[admin@localhost ~]$ lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Flags: fast devsel
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Flags: bus master, medium devsel, latency 0
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 8a [Master SecP PriP])
Flags: bus master, fast devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_generic, pata_acpi, ata_piix
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled]
Kernel modules: vboxvideo
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at f0000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at d010 [size=8]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
Flags: bus master, fast devsel, latency 0, IRQ 20
I/O ports at d020 [size=32]
Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
Memory at f0800000 (32-bit, prefetchable) [size=16K]
Kernel driver in use: vboxguest
Kernel modules: vboxguest
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at d100 [size=256]
I/O ports at d200 [size=64]
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Flags: bus master, fast devsel, latency 64, IRQ 22
Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
Flags: bus master, medium devsel, latency 0, IRQ 9
Kernel modules: i2c-piix4
00:08.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at f0820000 (32-bit, non-prefetchable) [size=128K]
I/O ports at d240 [size=8]
Capabilities: <access denied>
Kernel driver in use
Alguma solução para este problema?
EDIT 2:
Eu posso resolver isso até certo ponto editando (criando) xorg.conf
arquivo em /etc/X11/
, o código de arquivo que estou compartilhando abaixo
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 28.0 - 70.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "VMware SVGA"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080_60.00"
EndSubSection
EndSection
Agora, qual é o problema?
Na verdade, depois de criar o arquivo xorg.conf, consigo obter mais resolução, mas não a resolução ( 1920 * 1080 ).