O Controle Remoto InfraRed parou de funcionar

0

Eu instalei recentemente o Ubuntu 12.04 e meu Compro K100 funcionou bem no começo. Mas em algum lugar ao longo do caminho parou de funcionar. Quem pode me ajudar a diagnosticar o problema?

Para começar, aqui estão algumas informações.

lsusb :

Bus 002 Device 018: ID 185b:3082 Compro K100 Infrared Receiver v2

dmesg | grep compro :

[   12.992886] mceusb 2-1.4:1.0: Registered Compro VideoMate IR with mce emulator interface version 1  
[ 2468.755328] mceusb 2-1.2:1.0: Registered Compro VideoMate IR with mce emulator interface version 1  

dmesg | grep usb :

[    1.641739] usbcore: registered new interface driver usbfs  
[    1.641748] usbcore: registered new interface driver hub  
[    1.641768] usbcore: registered new device driver usb  
[    2.352920] usbcore: registered new interface driver libusual  
[    2.644360] usb 1-1: new high-speed USB device number 2 using ehci_hcd  
[    2.887996] usb 2-1: new high-speed USB device number 2 using ehci_hcd  
[    3.091819] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd  
[    3.639003] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd  
[    3.802762] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd  
[    3.898544] scsi6 : usb-storage 2-1.2:1.0  
[    3.898595] usbcore: registered new interface driver usb-storage  
[    3.966517] usb 2-1.3: new high-speed USB device number 5 using ehci_hcd  
[    4.059965] scsi7 : usb-storage 2-1.3:1.0  
[    4.130275] usb 2-1.4: new high-speed USB device number 6 using ehci_hcd  
[    4.293976] usb 2-1.8: new full-speed USB device number 7 using ehci_hcd 
[    4.412784] usb 2-1.8: config 0 descriptor??  
[    4.509855] usb 2-1.1.1: new low-speed USB device number 8 using ehci_hcd  
[    4.627949] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input5  
[    4.628042] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse   [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1.1/input0  
[    4.628057] usbcore: registered new interface driver usbhid  
[    4.628059] usbhid: USB HID core driver  
[    4.709412] usb 2-1.1.2: new low-speed USB device number 9 using ehci_hcd  
[    4.828284] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input6  
[    4.828426] generic-usb 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Keyboard   [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.1.2/input0  
[    4.835006] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.1/input/input7  
[    4.835236] generic-usb 0003:046D:C316.0003: input,hidraw2: USB HID v1.10 Device   [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.1.2/input1  
[   12.801271] input: Media Center Ed. eHome Infrared Remote Transceiver (185b:3082) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/rc/rc0/input9  
[   12.801320] rc0: Media Center Ed. eHome Infrared Remote Transceiver (185b:3082) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/rc/rc0  
[   12.921244] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10  
[   12.921369] usbcore: registered new interface driver uvcvideo  
[   12.992886] mceusb 2-1.4:1.0: Registered Compro VideoMate IR with mce emulator interface version 1  
[   12.992896] mceusb 2-1.4:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)  
[   12.992931] usbcore: registered new interface driver mceusb  
[   13.584509] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input11  
[   13.605165] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0  
[ 1881.898680] usb 2-1.4: USB disconnect, device number 6  
[ 1898.456785] usb 2-1.4: new high-speed USB device number 10 using ehci_hcd  
[ 1898.560247] scsi8 : usb-storage 2-1.4:1.1  
[ 1961.140680] usb 2-1.4: USB disconnect, device number 10  
[ 1961.850500] usb 2-1.4: new high-speed USB device number 13 using ehci_hcd  
[ 1961.952297] scsi9 : usb-storage 2-1.4:1.1  
[ 1962.674182] usb 2-1.4: USB disconnect, device number 13  
[ 1962.872947] usb 2-1.4: new high-speed USB device number 14 using ehci_hcd  
[ 1962.977036] scsi10 : usb-storage 2-1.4:1.1  
[ 1963.185342] usb 2-1.4: USB disconnect, device number 14   
[ 1963.895426] usb 2-1.4: new high-speed USB device number 17 using ehci_hcd  
[ 1963.998828] scsi11 : usb-storage 2-1.4:1.1  
[ 2459.249660] usb 2-1.2: USB disconnect, device number 4  
[ 2468.228341] usb 2-1.2: new high-speed USB device number 18 using ehci_hcd  
[ 2468.562431] input: Media Center Ed. eHome Infrared Remote Transceiver (185b:3082) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/rc/rc1/input22  
[ 2468.562588] rc1: Media Center Ed. eHome Infrared Remote Transceiver (185b:3082) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/rc/rc1  
[ 2468.562850] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input23  
[ 2468.564473] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0  
[ 2468.755328] mceusb 2-1.2:1.0: Registered Compro VideoMate IR with mce emulator interface version 1  
[ 2468.755339] mceusb 2-1.2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)  

lsmod | grep usb :

mceusb                 18143  0   
rc_core                26412  10  ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,rc_rc6_mce,mceusb  
usbhid                 47199  0   
hid                    99592  1 usbhid  
usb_storage            49198  2  

O que mais posso executar para saber por que esse dispositivo parou de funcionar?

    
por Rudi Strydom 17.11.2012 / 10:12

1 resposta

1

Eu tenho o mesmo problema. Usando o mesmo vídeo remoto K100.

Não tenho certeza se isso irá ajudá-lo, mas eu li e parece que os problemas começaram após uma certa atualização do kernel ... Você pode sempre tentar reverter para um kernel anterior e ver se isso funciona, mas eu não recomendaria.

No final, acabei usando meu Genius Gamepad juntamente com JJK (Java Joypad para mapeador de teclado) para atuar como um controle remoto. link

No entanto, não tenho certeza se essa é uma solução / solução alternativa que você pode usar.

    
por Janpan 15.12.2012 / 15:50