{Debian} Disco externo desmontando e corrompendo arquivos grandes carregados com seafile

Question

Então eu comprei recentemente uma pequena placa de desenvolvimento (radxa) para usar com um drive externo extra que eu tive que criar um clone de dropbox. No começo eu estava usando Owncloud, mas devido a minha limitação de sistema (32 bits), o php não conseguia lidar com arquivos acima de 2gb, então mudei para o seafile, já que tenho muitos arquivos acima de 2GB. Tudo estava indo bem carregando arquivos menores (< 1gb). As coisas mudaram ao tentar arquivar mais de 1,5 GB.

Minha unidade externa é uma seagate normal de 1Tb com um adaptador de energia e está formatada em EXT4. Ele é configurado para montagem automática na inicialização (/ dev / sda1 para / media / ExtDrive) e tudo estava funcionando bem.

Ao fazer upload de arquivos grandes, recebi um erro do seafile que não consegue ler o local dos dados (a unidade). Então eu verifico se o seu montado com fdisk -l não parece. Eu posso ir na pasta da unidade, mas recebo um erro de permissão e, ao alterar a permissão, estou obtendo um erro de somente leitura do sistema de arquivos.

Ao reinicializar, o PC parece travar (pode conectar sozinho via SSH) e precisa desconectar o cabo de alimentação do PC e da unidade externa, então tudo parece bem até eu tentar fazer upload de arquivos grandes, então acontece a mesma coisa. Às vezes eu preciso mesmo executar o fsck na unidade externa porque ela está corrompida.

Poderia ser a minha unidade externa que não está funcionando corretamente ou é uma configuração que eu não configurei?

Obrigado pessoal!

Aqui estão as últimas linhas do dmesg:

[15296.905650] Buffer I/O error on device sda1, logical block 66827920
[15296.905670] Buffer I/O error on device sda1, logical block 66827921
[15296.905690] Buffer I/O error on device sda1, logical block 66827922
[15296.905716] Buffer I/O error on device sda1, logical block 66827923
[15296.905737] Buffer I/O error on device sda1, logical block 66827924
[15296.905760] Buffer I/O error on device sda1, logical block 66827925
[15296.905781] Buffer I/O error on device sda1, logical block 66827926
[15296.905799] Buffer I/O error on device sda1, logical block 66827927
[15296.905815] Buffer I/O error on device sda1, logical block 66827928
[15296.905832] Buffer I/O error on device sda1, logical block 66827929
[15296.905849] Buffer I/O error on device sda1, logical block 66827930
[15296.905868] Buffer I/O error on device sda1, logical block 66827931
[15296.905885] Buffer I/O error on device sda1, logical block 66827932
[15296.905904] EXT4-fs warning (device sda1): ext4_end_bio:258: I/O error writing to inode     16258903 (offset 1228800 size 126976 starting block 66827940)
[15296.905940] sd 0:0:0:0: rejecting I/O to offline device
[15296.905996] sd 0:0:0:0: rejecting I/O to offline device
[15296.906052] sd 0:0:0:0: rejecting I/O to offline device
[15296.906083] sd 0:0:0:0: rejecting I/O to offline device
[15296.916336] sd 0:0:0:0: rejecting I/O to offline device
[15296.926333] sd 0:0:0:0: rejecting I/O to offline device
[15296.926358] Buffer I/O error on device sda1, logical block 66827933
[15296.926400] Buffer I/O error on device sda1, logical block 66827934
[15296.926425] Buffer I/O error on device sda1, logical block 66827935
[15296.926456] Buffer I/O error on device sda1, logical block 66827936
[15296.926486] Buffer I/O error on device sda1, logical block 66827937
[15296.926517] Buffer I/O error on device sda1, logical block 66827938
[15296.926544] Buffer I/O error on device sda1, logical block 66827939
[15296.926580] Buffer I/O error on device sda1, logical block 66827940
[15296.926605] Buffer I/O error on device sda1, logical block 66827941
[15296.926635] Buffer I/O error on device sda1, logical block 66827942
[15296.926668] Buffer I/O error on device sda1, logical block 66827943
[15296.926694] Buffer I/O error on device sda1, logical block 66827944
[15296.926723] EXT4-fs warning (device sda1): ext4_end_bio:258: I/O error writing to inode  16258903 (offset 1351680 size 49152 starting block 66827952)
[15296.926795] JBD2: Detected IO errors while flushing file data on sda1-8
[15296.926822] sd 0:0:0:0: rejecting I/O to offline device
[15296.926947] sd 0:0:0:0: rejecting I/O to offline device
[15296.927041] sd 0:0:0:0: rejecting I/O to offline device
[15296.927655] Aborting journal on device sda1-8.
[15296.927727] sd 0:0:0:0: rejecting I/O to offline device
[15296.927790] JBD2: I/O error detected when updating journal superblock for sda1-8.
[15296.929017] sd 0:0:0:0: rejecting I/O to offline device
[15296.929056] EXT4-fs error (device sda1): ext4_journal_start_sb:296: Detected aborted journal
[15296.929088] EXT4-fs (sda1): Remounting filesystem read-only
[15296.929105] EXT4-fs (sda1): previous I/O error to superblock detected
[15296.929138] sd 0:0:0:0: rejecting I/O to offline device
[15296.929167] EXT4-fs (sda1): ext4_da_writepages: jbd2_start: 515 pages, ino 16258904; err -30
[15296.936264] sd 0:0:0:0: rejecting I/O to offline device
[15296.936342] sd 0:0:0:0: rejecting I/O to offline device
[15296.936381] sd 0:0:0:0: rejecting I/O to offline device
[15296.936411] sd 0:0:0:0: rejecting I/O to offline device
[15296.936442] sd 0:0:0:0: rejecting I/O to offline device
[15296.936477] sd 0:0:0:0: rejecting I/O to offline device
[15298.516344] rk30_i2c rk30_i2c.2: Addr[0x50] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x1b
[15298.536301] rk30_i2c rk30_i2c.1: Addr[0x5a] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[15298.556330] rk30_i2c rk30_i2c.1: I2C_CON: start bit is set
[15298.776342] rk30_i2c rk30_i2c.1: Addr[0x5a] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[15298.796291] rk30_i2c rk30_i2c.1: I2C_CON: start bit is set
[15299.016313] rk30_i2c rk30_i2c.1: Addr[0x5a] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[15299.036311] rk30_i2c rk30_i2c.1: I2C_CON: start bit is set
[15299.256302] rk30_i2c rk30_i2c.2: Addr[0x50] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
[15299.276327] rk30_i2c rk30_i2c.2: I2C_CON: start bit is set
[15309.180104] usb 2-1.4.4: USB disconnect, device number 15
[15310.697177] usb 2-1.4.4: new low speed USB device number 16 using usb20_host
[15310.802377] usb 2-1.4.4: New USB device found, idVendor=093a, idProduct=2510
[15310.808255] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15310.808388] usb 2-1.4.4: Product: USB Optical Mouse
[15310.814035] usb 2-1.4.4: Manufacturer: PixArt
[15310.827271] input: PixArt USB Optical Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.0/input/input251
[15310.832038] generic-usb 0003:093A:2510.00FC: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-usb20_host-1.4.4/input0
[15370.875962] usb 2-1.4.4: USB disconnect, device number 16
[15372.389136] usb 2-1.4.4: new low speed USB device number 17 using usb20_host
[15372.493410] usb 2-1.4.4: New USB device found, idVendor=093a, idProduct=2510
[15372.495338] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15372.495403] usb 2-1.4.4: Product: USB Optical Mouse
[15372.497344] usb 2-1.4.4: Manufacturer: PixArt
[15372.509754] input: PixArt USB Optical Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.4/2-1.4.4/2-1.4.4:1.0/input/input252
[15372.512293] generic-usb 0003:093A:2510.00FD: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-usb20_host-1.4.4/input0
[15386.650305] sd 0:0:0:0: rejecting I/O to offline device
[15386.652343] sd 0:0:0:0: rejecting I/O to offline device

    

Answer 1

Consegui consertar desconectando meu mouse e plugando a unidade externa em um hub USB. Estou confuso sobre o porquê de estar funcionando, mas pelo menos isso acontece!