resolução de problemas da configuração do servidor proxy bip: FATAL: mkdir ($ HOME / .bip / logs) Nenhum arquivo ou diretório

0

Estou tentando configurar o bip em um servidor proxy (ou seja, a instância do AWS EC2 - um servidor virtual privado) e quando tento executá-lo com o comando:

'sudo /usr/bin/bip -f .bip/bip.conf'

do meu diretório /home/user , recebo a seguinte mensagem:

FATAL: mkdir($HOME/.bip/logs) No such file or directory

Acredito que o arquivo ~/.bip/bip.conf esteja incorreto, porque posso executar o comando em ~/.bip/bip_copy.conf , em que bip_copy.conf é o arquivo de configuração padrão. Meu arquivo ~/.bip/bip.conf está abaixo.

echo $HOME retorna /home/ubuntu (onde eu tenho chamado meus comandos). Além disso, meu diretório ~/.bip/ contém meu arquivo bip.conf e logs .

Eu tenho acompanhado esses tutoriais como um guia, mas eles não me ajudaram a solucionar essa situação:

link link link

Meu bip.conf :

# bip default config file.
# Thou shoult change thy password

ip = "0.0.0.0";

# To connect a client to bip, try the port below, and
# be sure to set the password to the value
# specified in the network you want to connect to. 
port = 6667;

# If you set this to true, you'll only be able to connect to bip
# with a SSL capable IRC client. Be sure to generate a certificate
# for bip with 'make cert'
client_side_ssl = false;

log_level = 2;

pid_file="$HOME/.bip/bip.pid";

# This is where logs go. Channel and private messages will use that
# configuration value as a prefix, and then log_format to determine
# full log filename.
log_root = "$HOME/.bip/logs";

# Log format allows you to make log filenames depend on the log line's
# attributes. Here's a list :
# %u -> user name
# %n -> network name
# %Y -> 4 digit year
# %m -> 2 digit month
# %d -> 2 digit day
# %c -> destination (#chan, privates, ...)
#log_format = "%n/%Y-%m/%c.%d.log";

# Sets the frequency (in seconds) of log syncing (real write to kernel)
log_sync_interval = 5;

# Makes bip send the log of each channel and privates while
# you were not connected to the proxy upon connection. 
#backlog = true;        # enable backlog
# backlog_lines = 10;       # number of lines in backlog, 0 means no limit
# backlog_always = true;        # backlog even lines already backlogged
backlog = true;
backlog_lines = 200; 
backlog_always = false;
backlog_reset_on_talk = false;
# backlog_reset_connection = false;
backlog_msg_only = true; 

# If blreset_on_talk talking on an irc network has the same effect of issuing
# /bip blreset, meaning that stuffed logged before the command won't be read
# back on backlog
#blreset_on_talk = false;

# Network definition, a name and server info

network {
    name = "freenode";
    server { host = "irc.freenode.net"; port = 6667; };
};


# Configuration example with one user who connects to two irc networks
# To use the multi-server feature:
#  - define the connections
#  - chose and setup a different login for each connection
# on your irc client:
#  - Use the multi server feature of your client, the server beeing each time
#    the server where bip is running. In your client setup server password to:
#      username:password:connectionname
#  - do not store the password in clear here, use the bipmkpw util to generate
# a hash

# User structure is grouping information for a given user
user {
    # The name in bip of the user
    # This is used by bip only
    name = "lucas";

    # this user's password (md5(md5("tata"))) with seed - generated by bipmkpw
    password = "f3d93275fa....";


    # SSL certificates checking mode for user:
    # - "none" to accept anything;
    # - "basic" to accept if the certificate is contained in the store;
    # In "basic" mode, encountered untrusted certificates can be added to
    # the store interactively by connecting a client and "trusting" them.
    # - "ca" to do a complete certificate chain checking with the objects
    # in the store below (you have to put in it every cert, CRL, up to the
    # root CA). You have to build your store manually, so you may prefer
    # using "basic" unless you're a crypto zealot...
    ssl_check_mode = "none";

    # Location of the user's store for SSL certificate check
    # In "basic" mode, that must point to a single file with all trusted
    # certs concatenated together (the interactive "trust" appends to this
    # file).
    # In "ca" mode, it's a directory of a standard openssl store; you must
    # put PEM objects (certificates, CRLs...) with .pem extension and run
    # 'c_rehash .' in it
    # ssl_check_store = "/home/bip'debian/.bip/trustedcerts.txt";

    # These will be the default for each connections
    default_nick = "testNickname";
    default_user = "testNickname";
    default_realname = "lucas";



    connection {
        name = "freenode";              # used by bip only
        network = "freenode";           # which IRC network to connect to

# Autojoined channels:
        channel { name = "#gslug"; };
        channel { name = "#help"; };
#       channel { name = "#help"; backlog = false; };
    };
};
    
por modulitos 10.04.2014 / 10:18

1 resposta

1

Quando você digita $HOME na linha de comando ou em um shell script, ele é expandido pelo shell. Em um arquivo de configuração, a menos que seja documentado de outra forma no manual do aplicativo, $HOME significa dólar, capital H, capital O, capital M, capital E. Portanto, altere a linha

pid_file="$HOME/.bip/bip.pid";

para

pid_file="/home/ubuntu/.bip/bip.pid";

e de forma semelhante para log_root .

    
por 11.04.2014 / 01:59

Tags